Curioustab

Home » Civil Engineering » RCC Structures Design

For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to

10
15
20
25
30

Correct Answer: 20

← Previous Question Next Question→

More Questions from RCC Structures Design

Pick up the assumption for the design of a prestressed concrete member from the following :
A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is
For a number of columns constructed in a rcjw, the type of foundation provided, is
If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by
As the percentage of steel increases
If the maximum dip of a parabolic tendon carrying tension P is h and the effective length of the prestressed beam is L, the upward uniform pressure will be
If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is
The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes
The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is
If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion