Curioustab

Home » Civil Engineering » RCC Structures Design

The weight of reinforced concrete, is generally taken as

2200 kg/m3
2300 kg/m3
2400 kg/m3
2500 kg/m3
2800 kg/m3

Correct Answer: 2400 kg/m3

← Previous Question Next Question→

More Questions from RCC Structures Design

An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus
As per IS : 456, the reinforcement in a column should not be less than
In a singly reinforced beam
If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by
If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where x is the distance of centre of gravity of column loads).
If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is
A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds
In a cantilever retaining wall without a heel slab
A ribbed slab is provided for
Enlarged head of a supporting column of a flat slabs is technically .known as

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion