Curioustab

Home » Electronics » Bipolar Junction Transistors (BJT)

The three bipolar transistor circuit configurations are common-base, common-emitter, and emitter-follower.

True

Correct Answer: True

← Previous Question Next Question→

More Questions from Bipolar Junction Transistors (BJT)

When a transistor is operating as a variable resistor it has transistance.
The polarity of VBE is such that it reverse biases the base-emitter junction.
The voltage gain of a transistor is inversely proportional to the change in output current.
This is a PNP transistor.
The voltage measured from the collector to the emitter is the sum of the base-emitter voltage plus the collector-base voltage.
In a BJT, the collector current is approximately equal to the base current.
When troubleshooting a bipolar junction transistor using an ohmmeter, if one of the junctions reads low in both directions, the junction is shorted and the transistor is bad. If one of the junctions reads high in both directions, the junction is shorted and the transistor is good.
Base bias provides _________.
The signal voltage gain of an amplifier, AV, is defined as __________.
The input resistance, Rin of a common-collector amplifier, consists of ____________.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion