Home » Mechanical Engineering » Theory of machines

Simple harmonic motion (SHM): Relate periodic time and frequency. Fundamental relation between frequency (f) and time period (T) of SHM. Choose the correct value of (T × f).

Q: Simple harmonic motion (SHM): Relate periodic time and frequency. Fundamental relation between frequency (f) and time period (T) of SHM. Choose the correct value of (T × f).

Concept By definition, frequency f = 1/T. Therefore, T × f = 1. Final Answer One

Difficulty: Easy

Zero
One
π/2
π
2π

Correct Answer: One

Explanation:

Concept
By definition, frequency f = 1/T. Therefore, T × f = 1.

Final Answer
One

← Previous Question Next Question→

More Questions from Theory of machines

Vibration isolation: Frequency ratio for unity transmissibility (general damping). In a base-excited isolation system, transmissibility (force or motion) equals unity at a specific frequency ratio r = ω/ω_n, independent of damping. Determine that frequency ratio.
Cam design for high-speed engines: Choose suitable follower motion law. Objective: Minimise shock/jerk and ensure smooth acceleration at high speeds in cam-follower systems. Select the most appropriate follower motion.
Gyroscopic effect on a ship: Determine bow/stern reaction for given rotation/turn. Given: Rotor spins clockwise when viewed from the stern. The ship turns right (starboard) while moving forward. State the resulting pitching effect due to the gyroscopic couple.
Twin-cylinder V-engine balance: Identify the V-angle from given reverse/direct crank positions. A diagram (not included here) shows the crank positions for primary reverse cranks and secondary direct cranks for a twin-cylinder V-engine. Choose the correct V-angle classification based on the shown configuration.
Steering of a ship: Choose the correct definition of the motion. Marine dynamics terminology: Identify what is meant by ‘‘steering’’ in ship motions (pitch, yaw/turn, roll). Select the correct description.
Gear–tooth terminology: What is the radial distance measured from the pitch circle down to the bottom (root) of the tooth space in standard spur or helical gears?
Gear trains: Identify the correct classification when gear axes move relative to a fixed reference axis. In such trains, the planet (or carrier-mounted) gears have centers that revolve about a fixed axis, unlike simple/compound/reverted trains whose gear axes remain fixed. Choose the correct option.
Locomotive dynamics: What effects can partial balancing of reciprocating parts produce in steam locomotives? Consider the typical residual unbalance when only a fraction of the reciprocating mass is balanced to limit out-of-balance forces. Choose the correct option.
Cam and follower selection for automotive valve gear: Which follower form is generally used in automobile engines for reduced wear at high speed? Assume mainstream production engines prioritizing durability, stable contact, and low sliding friction at the cam–tappet interface. Choose the correct option.
Gear classification by pitch-line speed: Over which peripheral velocity range are gears termed medium-velocity gears? Use standard machine design bands for low, medium, and high pitch-line speeds. Choose the correct option.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion