Curioustab

Home » Civil Engineering » RCC Structures Design

On an absolutely rigid foundation base, the pressure will

be more at the edges of the foundation
be uniform
not be uniform
be zero at the centre of the foundation.

Correct Answer: not be uniform

← Previous Question Next Question→

More Questions from RCC Structures Design

If W is weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding, is
Total pressure on the vertical face of a retaining wall of height h per unit run exerted by the retained earth weighing w per unit volume, is
Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds
An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
The weight of reinforced concrete, is generally taken as
An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus
As per IS : 456, the reinforcement in a column should not be less than
In a singly reinforced beam
If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by
If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where x is the distance of centre of gravity of column loads).

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion