Minimum thickness criteria for flat slabs:\nWhich of the following thickness rules apply to flat slabs under normal design practice (choose the most comprehensive statement)?

Introduction / Context:
Flat slabs are two-way slabs supported directly by columns, sometimes with column heads and drops. Thickness must satisfy both a minimum absolute value for robustness and span-to-depth limits for deflection control, with different limits for interior and edge panels and for the presence/absence of drops.

Given Data / Assumptions:

• General building-type flat slabs.
• Common rules of thumb and code-based span/depth limits.

Concept / Approach:
A typical minimum absolute thickness is about 125–130 mm; 13 cm (130 mm) is a common conservative minimum in practice. Additionally, deflection control is checked via effective span-to-depth ratios such as L/32 or L/36, with specific values depending on whether the panel is interior or at the edge and whether drops are present. Thus, multiple criteria simultaneously apply; the governing requirement is the most stringent among them.

Step-by-Step Reasoning:
Check absolute minimum thickness (≈ 13 cm as a practical floor).Apply span/depth ratios (e.g., L/32, L/36) depending on panel location and detailing.Select the largest thickness demanded by any controlling criterion.

Verification / Alternative check:
Even after meeting these limits, perform serviceability checks (immediate and long-term deflection). Shear (punching) near columns must also be verified, which can require further local thickening or shear reinforcement regardless of the basic slab thickness.

Why Other Options Are Wrong:
Each single option represents only one criterion. In practice, designers must comply with all applicable checks, hence the comprehensive answer is the inclusive choice.

Common Pitfalls:

• Using only an absolute minimum without deflection verification.
• Ignoring changes between interior and edge panels or the presence of drops.

Final Answer:
all the above