Curioustab

Home » Civil Engineering » RCC Structures Design

The steel generally used in R.C.C. work, is

stainless
mildsteel
high carbon steel
high tension steel.

Correct Answer: mildsteel

← Previous Question Next Question→

More Questions from RCC Structures Design

If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept
If p1 and p2 are mutually perpendicular principal stresses acting on a soil mass, the normal stress on any plane inclined at angle θ° to the principal plane carrying the principal stress p1, is :
Steel bars are generally connected together to get greater length than the standard length by providing
A very comfortable type of stairs is
The modular ratio m of a concrete whose permissible compressive stress is C, may be obtained from the equation.
If permissible compressive stress in concrete is 50 kg/cm2, tensile stress in steel is 1400 kg/cm2 and modular ratio is 18, the depth d of the beam, is
The pitch of the main bars in a simply supported slab, should not exceed its effective depth by
P is the prestressed force applied to tendon of a rectangular prestressed beam whose area of cross section is A and sectional modulus is Z. The minimum stress f on the beam subjected to a maximum bending moment M is
The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stressess simultaneously, is called
The maximum permissible size of aggregates to be used in casting the ribs of a slab, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion