Total emitter current is:

More Questions from Bipolar Junction Transistors (BJT)

• The input/output relationship of the common-collector and common-base amplifiers is:
• With the positive probe on an NPN base, an ohmmeter reading between the other transistor terminals should be:
• Three different Q points are shown on a dc load line. The upper Q point represents the:
• A current ratio of IC/IE is usually less than one and is called:
• Most of the electrons in the base of an NPN transistor flow:
• The symbol hfe is the same as:
• The C-B configuration is used to provide which type of gain?
• A transistor may be used as a switching device or as a:
• If a transistor operates at the middle of the dc load line, a decrease in the current gain will move the Q point:
• If VCC = +18 V, voltage-divider resistor R1 is 4.7 kΩ, and R2 is 1500Ω, what is the base bias voltage?

Discussion & Comments