Curioustab

Home » Electronics » Bipolar Junction Transistors (BJT)

A transistor may be used as a switching device or as a:

fixed resistor
tuning device
rectifier
variable resistor

Correct Answer: variable resistor

← Previous Question Next Question→

More Questions from Bipolar Junction Transistors (BJT)

If a transistor operates at the middle of the dc load line, a decrease in the current gain will move the Q point:
If VCC = +18 V, voltage-divider resistor R1 is 4.7 kΩ, and R2 is 1500Ω, what is the base bias voltage?
What is the collector current for a C-E configuration with a beta of 100 and a base current of 30 µA?
With low-power transistor packages, the base terminal is usually the:
The Q point on a load line may be used to determine:
For a C-C configuration to operate properly, the collector-base junction should be reverse biased, while forward bias should be applied to which junction?
A collector characteristic curve is a graph showing:
Which is the higher gain provided by a C-E configuration?
If an input signal ranges from 20–40 µA (microamps), with an output signal ranging from .5–1.5 mA (milliamps), what is the ac beta?
With a PNP circuit, the most positive voltage is probably:

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion