Home » Mechanical Engineering » Strength of Materials

Basic definition check: compressive stress and strain under axial shortening When a body is subjected to two equal and opposite pushes and tends to shorten in length, the nature of the stress and strain induced is compressive. State whether this statement is correct.

Q: Basic definition check: compressive stress and strain under axial shortening When a body is subjected to two equal and opposite pushes and tends to shorten in length, the nature of the stress and strain induced is compressive. State whether this st…

Concept Axial loads that push ends together reduce length and create compressive normal stress (σ < 0 by sign convention) and compressive strain. Final Answer True

Difficulty: Easy

True
False
True only for ductile materials
False unless temperature is constant

Correct Answer: True

Explanation:

Concept
Axial loads that push ends together reduce length and create compressive normal stress (σ < 0 by sign convention) and compressive strain.

Final Answer
True

← Previous Question Next Question→

More Questions from Strength of Materials

Definition of bending moment at a section of a beam Complete the definition: The bending moment at a point on a beam is the algebraic ________ of all the moments of the forces about that point (on either side). Choose the correct word.
Deflection comparison: point load at midspan vs UDL (same total load) Beam A: simply supported, span L, central point load W. Beam B: simply supported, uniformly distributed load with total load W. Find δ_A/δ_B, the ratio of their maximum midspan deflections. Choose the correct value.
Stress distribution in simple bending of beams Under the assumptions of simple (Euler–Bernoulli) bending, how does normal bending stress vary from the neutral axis to the outer fibers? Choose the correct variation.
Punching a plate: maximum permissible hole diameter from shear versus punch crushing A plate of thickness t is punched. The plate’s maximum shear stress is one-fourth of the punch’s maximum crushing stress. Find the maximum hole diameter that can be punched without exceeding either limit. Choose the correct expression in terms of t.
Deflection in closely coiled helical springs: effect of number of turns Two closely coiled helical springs A and B are identical in all respects except that spring A has half as many turns as spring B. Find the ratio of their deflections δ_A/δ_B under the same load. Choose the correct value.
Power transmission and shaft sizing: compare diameters for equal power at different speeds Two circular shafts 'A' and 'B' transmit the same power. Shaft 'A' runs at 250 rpm and shaft 'B' runs at 300 rpm. Decide which shaft must have the larger diameter (same material and allowable shear stress assumed). Choose the correct statement.
Thermal stress due to cooling: nature of stress developed in a bar cooled to −5°C A straight uniform bar is cooled down to −5°C. Assume the bar's ends are fully restrained against axial movement so that free contraction cannot occur. Identify the nature of stress developed due to cooling.
Hooke's law within elastic limit: relation between stress and strain For a material loaded within its elastic (proportional) limit, state how stress varies with strain. Choose the most appropriate completion.
Bending theory: stress at the neutral axis of a beam cross-section Define the neutral axis of a beam cross-section under pure bending. Identify the bending stress value at the neutral axis.
Tension test terminology: stress level where extension accelerates with small load increase From a standard stress–strain curve in tension, identify the stress at which the extension increases more rapidly than the increase in load.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion